Head Joint Weep™ - Time Saving Weeps for Brick Veneers
What Head Joint Weep does:
- They create weep tunnels at lowest point of cavity.
- They are spacers and easy to install.
- They save time.
How to install Head Joint Weep*
- Place Head Joint Weep as spacers in each head joint of each brick.
- Masonry Technology, Inc. recommends the installation of drip plate under all flashings over all steel lintels.
- See Specs and Animation
Ordering and Shipping Information
|Units per Box|| 400
|Boxes per Pallet|| 20
|Units Per Pallet|| 8000
|Pallet Size|| 45" x 45" x 54"|
Contact MTI at 1-800-879-3348 for specific cost to your destination.
Head Joint Weep Specifications
0.24" (0.6 mm) thick acetac 3/8" (9.5 mm) wide x 3/8" (9.5 mm) high and 4.5" (114.3 mm) long.
NOTE: Masonry Technology, Inc. recommends the installation of drip plate under all flashing over all steel lintels and shelf angles.
Product Cutsheet: Download Product Cut Sheet
Google SketchUp 3D Model:
Download Product Model from 3D Warehouse
Popular HyperSpecs® Wall Details
featuring Head Joint Weep
Browse Wall Details
Browse Wall Details with Head Joint Weep
*The installation listed provides the most common installation instructions. For specific installation details please find your wall detail in our HyperSpecs